manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 342

Settings

342

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

20.2.3. Recorder

20.2.3.1. Recordings

Temporary Recorder Data
This setting only applies to Third Generation Analyzers. In this box you can choose a folder location where
to store temporary recording files that are created during recording and the maximum file size. Please
choose a folder on a fast hard drive or SSD to keep up with the data that is received on the bus. If the
host can not keep up writing the data to disk while making the Recording, the Recording will be stopped as
soon as the FireSpy on-board memory is filled.

Initial location of recordings
In this box you can specify the folder that is initially used for opening and saving Recorder files. The first
time you open or save a Recorder file after changing this setting, the file dialog to open or save a file will
display the specified folder.

External Timing
Some devices can be configured to use external timing, for example from an IRIG source. If you want to
have the recorder use this external timing, you should enable this option. The recorder then can show an
extra field which represents the external timing.

UTC Time Format
This combo box can be used to specify a time format to be used in the Recorder packet view to show the
UTC packet time stamp

UTC Data Format
This combo box can be used to specify a time format to be used in the Recorder packet view to show the
UTC packet time stamp date

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды