manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 247

Mil1394 Protocol support

247

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Triple Analyzers
For triple Analyzers the toolbar looks as follows:

It contains the following additional control:

Analyzer node select control
With this control you are able to select the protocol analysis result of each supported Analyzer node.

13.2.3.2. Relation Tree Pane

The 'relation tree' pane shows the result of the Mil1394 Protocol analyzer in a hierarchical tree. The
hierarchy of the tree shows the nodes as root items and the found Mil1394 packets of a node as child
items. The tree shows a node by its name and assigned channel number and it shows the found Mil1394
packets of a node by their type. An exception is the first root item its child item represents the found
STOF packets, see also figure below.

Root items (except the first root item) have four child items maximum. The child items represent the
Transmit packets of the node, the Receive packets of the node, the DataPump packets of the node and
the Unknown packets of the node. A packet is an Unknown packet if it can't be identified as one of the
three Mil1394 packet types mentioned above. A child item of a root item is not displayed if not any
Mil1394 packet in the 'transactions / packets' pane corresponds to the child item.

A red cross in front of a child item indicates one or more Mil1394 packets in the 'transactions / packets'
pane, which correspond to the child item, contains one or more errors.  

Click an item in the tree to highlight it. If one or more Mil1394 packets in the 'transactions / packets' pane
correspond to the highlighted item, the first of these Mil1394 packet will highlight and the remaining of
these Mil1394 packets will be indicated with a gray background color.

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды