manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 245

Mil1394 Protocol support

245

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

13.2. Recorder Protocol View

This chapter describes the Mil1394 Protocol of the Protocol View. When a Recorder file is opened or
when a new recording is downloaded from the Analyzer, or when the Protocol View is opened, the Mil1394
Protocol analyzer scans through the recorded data in the Recorder and displays the found result in the
Protocol View. An example is shown below.

13.2.1. What is it

The result of the Mil1394 Protocol analyzer is displayed in 3 different panes. In the right pane
(transactions / packets) all found Mil1394 packets of the involved nodes and bus resets are displayed. The
'transactions / packets' pane lists the Mil1394 packets and bus resets in a chronological order. The left
pane (relation tree) shows the result of the Mil1394 Protocol analyzer in a hierarchical tree. The hierarchy
of the tree shows the nodes as root items and the found Mil1394 packets of the nodes as child items. An
exception is the first root item in the tree. The child item of the first root item represents the found STOF
packets. The tree shows a node by its name and assigned channel number. It shows the found Mil1394
packets of a node by their type. The Mil1394 Protocol defines the following 5 type of Mil1394 packets:
STOF packet, Transmit packet, Receive packet, DataPump packet and Unknown packet. A Mil1394
packet is an Unknown packet if it can't be identified as one of the other 4 Mil1394 packet types. 

If you click an item in the tree, the item will highlight. If one or more Mil1394 packets in the 'transactions /
packets' pane correspond to the highlighted item, then the first one of these Mil1394 packets will highlight.
The remaining Mil1394 packets will be indicated with a gray background.

Conversely, if you click a Mil1394 packet in the 'transactions / packets' pane, the Mil1394 packet will
highlight. The item in the tree of the 'relation tree' pane to which the highlighted Mil1394 packet
corresponds will also highlight. The remaining Mil1394 packets, which also correspond to the highlighted
item, will be indicated with a gray background color.

The details of the highlighted Mil1394 packet in the 'transactions / packets' pane are displayed in the
middle pane (detail) of the Protocol View. The details of a highlighted Mil1394 packet are its fields and
their values. The 'detail' pane displays the fields and their values in two different forms. Each form has a

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды