manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 211

Filter/Trigger

211

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

This commands does the same as the 'Save' command, except that it will always display the file dialog,
so that you can specify a file name and path.

Windows
From the 'Windows' menu you can open one of the other windows of the Analyzer.

12.2.2. Trigger

The Trigger Sequencer is not available on

·

Stealth Series in Symbol Recorder mode

An example of the Trigger page is shown below.

In this example a little more complex Trigger Sequencer program flow is used. And a cyclic pre-trigger
buffer has been enabled that will never use more than 25% of the total Recorder memory. We will discuss
the different part of this page in more details below.

Trigger Sequencer
At the top of the Trigger Sequencer box there are some indicators and tool buttons. In the remaining area
of the box the Trigger Sequencer program flow diagram is displayed. A flow can be defined by adding
items to the program flow and changing their properties.
We will first discuss the indicators and tool buttons and after that the program flow diagram area:

Trigger sequencer active indicator
This indicator will light when the trigger sequencer is active. The sequencer will be active when it is
started and has not been stopped yet. An active sequencer will always be executing one of the items in
the trigger sequencer program flow. The item currently being executed is indicated with a red arrow (see
example above).
If a 'Stop' item is executed, the sequencer will stay executing this 'Stop' item and as a result of this, it
stays active but it does not execute any other item anymore.

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды