manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 210

Filter/Trigger

210

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The selected format describes the commands for a 'Simplified direct-access (RBC)' unit. By choosing a
value for the 'operation code' field, the format will automatically adjust to the format of the selected
command.

In the example conditions are set on some fields such that the packet will only fit the set if the 'operation
code' equals the 'READ(10)' command with a 'transfer length' or 256 or more.

12.2. Details

Triple Analyzers
For triple Analyzers only, the toolbar contains the following control to select the active Analyzer node.

This control can be used to select the Analyzer node to set Filter/Trigger conditions for. By clicking on the
"a", "b" or "c", the corresponding node can be selected. A red background indicates the node is shown. A
white background indicates a node is hidden. 

12.2.1. Menus

File
The following menu items can be selected:

Open
With this command you can open an existing Analyzer filter/trigger settings file. By default these files
have an extension of .fsf.
In the Settings Dialog you can select a file that should be opened automatically when the Analyzer
application is started.

Save
With this command you can save the current filter/trigger settings as a Analyzer filter/trigger settings file.
By default these files have an extension of .fsf.
Filter/trigger settings saved this way, can later be viewed again by using the 'Open' command of the 'File'
menu.
If no file name was given before, a file dialog is displayed to enter the file name and path.

Save As

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды