manualshive.com logo in svg

DAP Technology 1394, Руководство по эксплуатации

Поделиться
Скачать
DAP Technology 1394 Скачать руководство пользователя страница 194

Scriptor

194

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

4.

Enable the buttons "Node A" and "Node B" 

5.

Enable the button "Data CRC Error" 

6.

Set "Number of packets" to 5 (press set) 

7.

Set "Channel" to 5 

8.

Set "Frame Offset" to 5000ms 

9.

Set "Packet Speed" to 800 

10. Start sending by pressing the button: "Send synchronous" 
11. Open the recorder window and download the recording 
12. In the recorder, open the Packets View ( Menu Bar - View - Packets View) 

Now that all windows are setup something like the Recorder picture below and the Control Panel picture
above, it is time to start looking at what happened. 

In the recorder picture, the time view shows 5 green and 5 red packets on nodes A and B. The green ones
are the STOF packets that are also sent by the script and they donot contain any errors. The other
packets are colored red because they contain errors (as set on the control panel). The distance between a
neighbouring red and green packet is exactly the frame offset we specified on the control panel. 

By selecting a red packet in the Packet View, we can also see what kind of error the packet contains. In
this case we chose for a data CRC error on the Control Panel and the recorder shows that the packet
indeed contains a data CRC error. 

11.6.3.2. Details

The script source code 
The picture below shows the Object Browser contents for the current example. The picture shows that the
script contains two main entry functions and five regular functions. The purpose of the functions will be
explained below: (see also the complete source further down this document) 

Содержание 1394











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды