DAP Technology 1394, Руководство по эксплуатации

Страница: 179 / 458

Scriptor
179 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
Next to this icon the application shows the number of clients connected. The port number of the
application and the client can be freely chosen so that it is possible to have multiple applications running a
server.
When the client is connected all control values that are send from the script are also send to the
connected remote clients. This can be used to create one large control panel that is divided between
multiple computers and/or monitors.
11.4. Data Editor
The data tab is used for editing data which can be used to set as packet data or as the header of a packet.
The Data Editor is shown in the picture below. The left side shows a table with all the data objects that are
defined, together with their properties. The name will be associated with a constant number by a a define
statement in de current script. Therefore, when filling packets, the name of a data object can be used to
refer to it. For data objects that contain more than 1 data block, two define statements (
<NAME>_FIRST
and
<NAME>_LAST
) will be created which you can use in the script to refer to your data.
Adding a new data object
To add a new data object, click on the "New" button int the toolbar. By default an empty data object is
created and its type is set to "None". Now, first select the type of data you would like to define by selecting
the correct item in the "Data type" combo box. The corresponding data editor will be shown and
depending on the type of data one may set the size in the "Size" spinbox. The number of bytes will
automatically be updated accordingly. The different data editors will be explained below.
Removing a data object
To remove a data object from the script, click on the "Delete" button in the toolbar.