DAP Technology 1394, Руководство по эксплуатации

Страница: 164 / 458

Scriptor
164 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
Functions
The list of functions contains all the functions that are defined in the source code of the script. This does
not necessarily mean that a function in this list is actually executed. Regular functions themselves are not
started as a process, but can only be called by other functions or processes. The order of this list only
reflects the order the functions are defined in the script. This has nothing to do with priorities. The priority
is determined by the process that calls a function.
11.2.6. Debugger
To use the debugger, a main software license version 5.4 or higher is required. For more information
about licenses see
License Manager .
The Debugger can be used to analyze and control a running script. If the debugger is enabled, the main
Scriptor window will look as in the picture below. On the left side of the script-editor pane a gray area is
visible. This area is used to indicate that something is happening at specific lines. For example, in the
image below a red circle with a yellow arrow in it is used to indicate that a process is broken because of a
break point at that specific line in the script. Available debug icons will be explained in the next section.
On the right side, in the Debugger tab, several debug views are available and the user is free to chooses
which one(s) to display. Each of the views will be explained in the next sections.
To set a breakpoint on a line of code, click on the gray border to the right of the line you want to set it for.
A red circle will show up, indicating that a breakpoint has been set.