Dantherm CDP 40, Руководство по обслуживанию

Страница: 21 / 40

21
Operation : Control panel
Operation
Control panel
Risk of electric shock
An electric shock can cause severe burning and in most extreme cases shock to the brain,
strain to the heart, injury to other organs or result in death.
•
Switch off the power on the main switch, while you open the dehumidifier.
• Remember also to switch off the power, while you close the dehumidifier.
Follow the steps below in order to access the control panel.
Step Description Illustration
1 Open the dehumidifier:
a) Loosen the two screws at
the bottom of the unit.
Check that the locks release
the front cover.
b) Pull upwards and remove
the front cover.
2 Loosen the two screws and re-
move the upper plate (covering
the control panel).
4 digit Display divided into 2 sections: The first 2 digits show the code and the last 2 show the
value of the code.
Code Value
By default the display will show the relative humidity RH %. This reading can be from the
external humidity/temperature sensor when available, if not the RH will be from the internal
humidity sensor.
Example
Warning
Caution
DANGER
Accessing the
control panel
a
b
a
b
Display
Default view
en