Dantherm CC 3000, Руководство по обслуживанию

Страница: 21 / 40

21
Operation : Modes and settings (overview)
Operation
Modes and settings (overview)
The CC 3000 controller makes it possible to customize the cooling strategy so it fits to the lo-
cal setup. Thus following main operation parameters can be adjusted/selected:
1. Main operation mode
2. Override modes
3. Dual zone
4. Unit specific set points
The CC3000 controller can operate in 4 different modes. In case additional equipment such as
air conditioner is connected to the controller it is important that operating mode is set so it
matches the actual setup:
• Free cooling mode (default)
• Standard mode
• Energy save mode
• Air-conditioning mode
(See “System operation strategy” on page 9)
(See how to change operation mode in section “Cooling mode zone 1 & 2” on page 28)
Besides the main operation mode there is a possibility to enable following override modes:
• Humidity control
Changes operation when humidity is too high (see more on page 28).
• Night mode
Changes operation within a defined time span each day (see more on page 29).
• Occupied mode
Changes operation while service is performed and returns back to normal operation
strategy, when time (defined via the settings in occupied mode) has passed (see more on
page 25).
It is possible to divide the operation area into 2 different zones with individual settings.
See how to enable dual zone in the section “Other settings” on page 30.
Set points and operation can be adjusted for each connected equipment separately:
• Free cooling unit(s)
• Air conditioner
• Heater
• Damper
• Alarms
(See more in section “Sub-menu: System setting level” on page 27)
General operation
parameters
Main operation
mode
Override modes
Dual zone
Unit specific set
points
en