098985 •
Version 1.0 • 11. 03 2020
11
en
Installation
This section describes how to install the electrical connection of the series AD 200 / 300 ad-
sorption dryers correctly
The following items must be checked prior to electrical connection of the adsorption dryer:
• Is the mains voltage in conformity with the voltage of the device?
• Are socket and supply system sufficiently fused?
• Has an RCCB been installed?
• Is the appliance coupler suitable for the building socket outlet?
• Is the socket outlet used grounded properly?
Step Action
Illustration
1
Connect the appliance coupler of the power cable included in
the delivery to the socket on the adsorption dryer.
2
Connect the power cable of the adsorption dryer to a suitable
power outlet.
Danger to life due to electric shock
• Prior to commissioning the technical data of the adsorption dryer must be compared with
the conditions prevailing in the room of installation!
• Use exclusively the original power cable! In case of loss or damage original power cables
are available from your adsorption dryer supplier.
Introduction
Electrical
connection
Warning
Caution
DANGER