32
Mounting of temperature control PCB
Tools
The material onto which you mount the control unit decides which tools you need.
Illustration
This is the temperature control
PCB
Mounting
Due to the cables the temperature control PCB should be mounted close to the DV
unit, preferably directly on the unit.
Follow these steps during the mounting:
Step
Action
1
Remove the transparent lid on the control PCB
2
Fix the control PCB (if possible on the unit) in the 4 Ø4 mm holes
3
Put the lid back
Connection
Connections are made through the non-screw terminals (WAGO). Please also see the
section about electrical connections.
