
Page
14
of
39
GTM Rear Panel Layout
Mic selection & Mic gain control
Here the active Microphone input can be chosen between the XLR and TRRS headset
inputs. Pressing and holding a button for a few seconds makes the panel live and
changeable. Press either button once to switch the input. The chosen active input will
light green and then the gain for that microphone can be adjust with the higher and
lower buttons.
Pressing and holding the XLR mic selection button will enable or d48V
phantom power (indicated by a red LED).
Pressing and holding the Headset mic selection button will toggle the TRRS mic DC
bias voltage b2.5V and +5V. Note that +2.5V is the default state and is
recommended if your headset manufacture does not supply Mic bias voltage
specifications.
Mic source selection, gain and DC power can be remotely controlled or locked in
GlenController, see
Game source selection
This button allows quick selection of the GTM’s Game input source. The source and
mixing controls can be fully configured in GlenController, see
information.
Identify/ Update button
Hold the button down when powering up the unit to enter DFU mode for manual
firmware updating.
In normal operation pushing and holding this button at the same time as other buttons
allows changing the device settings, see
Mic selection
Mic gain control
Game source
selection
Identify /
Update button
Network RJ45
etherCON
USB-C connector
TOSLINK connector
GPIO DC loops
Stereo Aux input
SDI interface
Содержание Glensound GTM
Страница 16: ...Page 16 of 39 Audio Block Diagram...