background image

The performance of your pellet appliance is greatly affected by the type and

quality of wood pellets burned.  As the heat output of various brands of pellets

differs, so will the performance and heat output of your appliance.

We recommend the use of screened pellet fuel in order to

reduce the amount of fines your stove will have to cope with.

PELLET QUALITY

WOOD

WOOD

PELLET FUEL

Your pellet stove is designed to burn APFI/FFI ‘Premium’
or ‘Standard’ quality wood pellets. Pellets that are soft
contain excessive amounts of loose sawdust, have been
or are wet, and produce 

clinkers

 or 

heavy ash

 will result

in reduced performance and may actually cause the
fire to go out.

PELLET CONSUMPTION

Fuel consumption will vary somewhat between fuel brands and stoves.  The following ‘rough
guide’ to pellet usage may be useful in assessing your stove’s operation, for ordering fuel
and in providing information to your authorized pellet stove dealer.

FACTORS AFFECTING PELLET FEED RATES

Generally, the smaller, harder and cleaner (free from fines) the pellets are, the faster they will
     feed at a given setting and vice versa.

The extremes in pellet size and quality can cause several hours of difference in burn time for a
     40 lb bag of pellets.

Heat production is directly related to the pounds of fuel burned per hour.  As fuel consumption
     goes down so will heat output and vice versa. 

Pellet feed rate, at the same fuel settings, may vary greatly from brand to brand and may vary
     somewhat from batch to batch within the same brand.

Setting

1

Fuel flow and burn times quoted are approximate and may vary with type of fuel used.

2

3

4

40 - 80 hours

35 - 48 hours

27 - 35 hours

22 - 30 hours

100 - 200 hours

86 - 120 hours

67 - 86 hours

55 - 75 hours

1.5 - 3 lbs per hour

2.5 - 3.5 lbs per hour

3.5 - 4.5 lbs per hour

4 - 5.5 lbs per hour

Amount of Pellets Burned

Approximate Burn Times

120 lb Hopper

300 lb Hopper

6

Содержание CAN/CSA B365













Отзывы: