DANPHONE Futronic MKII Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 65

DANPHONE Futronic MKII Скачать руководство пользователя страница 44

Page 44 of 65

Once the polling mode has been selected, press OK. The test box will automatically
synchronize with the AIS transponder; transmit the request and then switch to receiving mode.
Wait for the transponder to respond and check the polled information appearing on the test box
display. The polled information will also be stored in the test box memory.

The polling mode also offers the opportunity of shifting to the alternative channels 06 and 15.
If you select the alternative channel, remember to switch back to CH 70.

Example of Printout from the Memory

:

   AIS # 1   Time/date: 10:57:22 / 26-09-2017
   VTS DATA: CH70-156.525 MHz RX  MMSI: 9999999990 Format 120 Category: 103
   TX MMSI: 2195576240
   Position: 57d12.3735 N   009d41.0096 E   Time: 08:57:22
   EOS: 122 ECC: 119   Status: OK
   RF: 156,525.5 kHz   Fwd.: 10.9 Watt   Rev.: 0.6 Watt    VSWR: 1.60

Request Message 5 (Class A)

In this mode you can request a Message 5 from Class A transponders. MSG 5 provides
information of the ship’s MMSI, call sign, IMO number, name, type of ship and dimensions, etc.

Use setup 3 from “Setup for AIS tests”.

Use setup 4 or 5

from “Setup for AIS tests” To include a power measurement with the test:

It is a requirement that the MMSI number registered in the test box is identical with the MMSI of
the AIS transponder to be tested. Please check and change number, if required, using the Edit
ship’s MMSI menu on page 12.

Select

“Request MSG 5”

and press

“OK”

. Then, select

“AIS frequency”

and press

“OK”

again.

The test box will automatically synchronize with the AIS transponder; transmit the request and
then switch to receiving mode. Wait for the transponder to respond and check the MSG 5
information appearing on the test box display.

The received MSG 5 information will also be stored in the test box memory.

Example of Printout from the Memory

:

   AIS # 1   Time/date: 08:26:25 / 14-09-2017
   Message ID:  5 MMSI:  231774000
   C.SIGN: OZ2101   IMO: 007922166   Name: EYSTNES
   Type of ship: 70   Dimension of ship: A: 10 m B: 93 m C: 3 m D: 13 m
   Electronic position fixing device: 1
   Draught of ship: 5.0 m   Destination: HIRTSHALS
   ETA: MMDD  9-12 HHMM 18:00
   AIS1 RF: 161,975.0 kHz   Fwd.: 10.1 Watt   Rev.: 0.4 Watt   VSWR: 1.49

Request Message 11 (UTC)

«
...
42
43
44
45
46
...
»

Содержание Futronic MKII


































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды