Dannmar DT-50 Скачать руководство пользователя страница 28

Страница: 28 / 84

DT-50 and DT-50A Tire Changer

P/N 5900260 — Rev. A1 — Dec. 2020

Inflation Gauge, Air Chuck and Control

The Inflation Gauge displays the air pressure in the Tire to which the Air Chuck is attached.
There is a stud located on the bottom of the Inflation Gauge assembly which can be used to hang the
air chuck and hose when not in use.
•

Air Chuck

Attaches to the threads on the Valve Stem. Includes a self-gripping clip so you do

not

have to hold the Air Chuck in place during inflation.

•

Inflation Gauge

Displays air pressure in the Tire to which the Air Chuck is attached.

•

Pressure Release Valve

Releases air from a Tire.

⚠

WARNING

Do not hold the Air Chuck while you are inflating a Tire

. This leaves you

too close to the Tire, which could result in injury if there is a problem during inflation.

•

Inflation Pedal

Located on the bottom left side of the Tire Changer. Press down and hold to

inflate.

To see the pressure in a Tire

: Attach the Air Chuck to the Tire’s Valve Stem; the Inflation Gauge

displays the air pressure currently in the Tire. You are

not

required to press the Foot Pedal.

To see pressure during Tire Inflation

: Attach the Air Chuck to the Tire’s Valve Stem, move

away from the Tire, then press the Inflation Pedal to inflate the Tire. The Inflation Gauge displays the air

pressure in the Tire as it inflates.

Partial views. Not to scale. Not all components shown.

Содержание DT-50




















































































Результаты поиска

Содержание DT-50

Отзывы:

Похожие инструкции для DT-50

Бренды по названию

Популярные бренды

Dannmar DT-50, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DT-50

Отзывы:

Похожие инструкции для DT-50

Бренды по названию

Популярные бренды