DJ Series of Rolling Jacks
6
P/N 5900258 — Rev. A — October 2020
Components
Rolling Jack components include:
•
Scissor Structure
. Rolling Jacks are scissor lifts that are powered by air pressure from the Air-
Operated Hydraulic Pump.
•
Air-Operated Hydraulic Pump
. Provides power to the Rolling Jack. The Air-Operated
Hydraulic Pump must be attached to an air supply: 20 cubic feet per minute (.57 cubic meters per
minute) and 100 psi (7 bar).
•
Foot Pedal
. Raises and lowers the Rolling Jack. Despite its name, you can use the Foot Pedal
with your hands or your feet. Located on the top of the Hydraulic Pump.
•
Hydraulic Hose
. Connects the Air-Operated Hydraulic Pump to the Hydraulic Cylinder; comes
connected.
•
Hydraulic Cylinder
. Moves the Scissor Structure up and down.
•
Safety Locks
. Hold the Rolling Jack in place once engaged. Always leave your Rolling Jack
either fully lowered or engaged on its Safety Locks;
never leave a Rolling Jack in an
unlocked position with a Vehicle on it
.
⚠
WARNING
Before starting work on a Vehicle, make sure the Rolling Jack is engaged on its
Safety Locks and the Lift Pads are in contact with the axle on the underside of the
Vehicle.
•
Safety Handle
. Moves the Rolling Jack off its Safety Locks so it can be lowered.
•
Adjustable Arms
. Slide in and out so you can precisely position the Lift Pads on the axles of the
Vehicles you are lifting.
•
Lift Pads
. Position them under the axle on the underside of the Vehicle. Lift Pads fit into the holes
on the end of the Adjustable Arms.
Tip
If you have a DJ-4500 Rolling Jack and want more control over where the Rolling
Jack contacts the axles on the underside of Vehicles, the DJ-4500 Adapter Kit
includes two sliding rubber contact pads and two sliding receivers.
•
Lift Pad Extenders
. Allow you to raise the height of the Lift Pads to better hit the axles on
Vehicles. Two Medium and two Tall Extenders are included with the Rolling Jack.
•
Extender Holder
. Hold the Lift Pad Extenders when you are not using them.
•
Moving Handle
. Used to move the Rolling Jack. Not the same thing as the Safety Handle.
•
Extendable Bases
. Move in and out to accommodate the distance between the Lift’s Runways.
•
Rollers
. Located on the ends of the Extendable Bases, the Lip Rollers sit on the Utility Rail Lip
and let you move the Rolling Jack.
•
Safety Brackets
. A safety feature, they hold the Rolling Jack in place on the Utility Rail. Installed
after the Jack is put into place.
Installation is mandatory
.
•
Adjustment Bolts
. Another safety feature, they hold the Extendable Bases in place. They come
installed but not tightened.
Tightening is mandatory
.
Содержание DJ Series
