Danish Interpretation Systems
Installation Manual
Manual 01 19 78010
18
26.
Changing/Replacing a seat
For changing or replacing a seat:
1.
Select “Seat Setup is OFF. Push to turn ON”
2.
Select “no” to “Clear existing Seat data and reassign
all seats?”
3.
Activate a microphone. The number of the
microphone is shown. Together with the text ‘Seat
Unassigned’
4.
Select “Enter Seat number”
5.
Type in the new seat number to be used for this
microphone and select
6.
“Assign Seat number”. If the seat is already in use a
warning message will be shown
7.
Select ‘Save configuration’
Use the icon in the top left corner to return to the Main Menu
27.
Save/Recall Layouts
When camera presets has been made the layout can be
stored in the Camera System Control Unit.
Up to three layouts can be saved.
The ‘Save’ button saves the current preset to the selected
‘Layout x’ into a file on the Camera System Control Unit.
The ‘Recall’ button recalls the selected ‘Layout x’ and
overwrites the current presets.
Use the icon in the top left corner to return to the Main Menu
After the system is setup
After having set up all seat presets and saved the Layout and Seat Configurations the system is ready to
use. The iPod (IPC) and the Wireless Router (WR) can be switched Off as they are only needed for setting
up the system.
If for any reason controlling of the camera(s) is needed during the meeting, the IPC and the WR shall not
be switched Off.
