P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 2 0
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging).
Do not apply force onto the controls protruding from the hob.
Adjust the bracket position to suit for different work surface’s thickness.
Cautions
1.
The ceramic cooker hob must be installed by qualified personnel or technicians.
We have professionals at your service. Please never conduct the operation by yourself.
2.
The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and
rotary dryers.
3.
The ceramic cooker hob shall be installed such that better heat radiation can be ensured
to enhance its reliability.
4.
The wall and induced heating zone above the work surface shall withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.
A steam cleaner is not to be used.
7.
This ceramic can be connected only to a supply with system impedance no more than
0.427 ohm. In case necessary, please consult your supply authority for system impedance
information.
