P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PA G E 1 2
OVER-TEMPERATURE PROTECTION
A temperature sensor equipped can monitor the temperature inside the ceramic hob.
When an excessive temperature is monitored, the ceramic hob will stop operation automatically.
RESIDUAL HEAT WARNING
When the hob has been operating for some time, there will be some residual heat.
The letter “H” appears to warn you to keep away from it.
DEFAULT WORKING TIMES
Another safety feature of the hob is auto shut down. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below:
USING THE TIMER
You can use the timer in two different ways:
•
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off
when the set time is up.
•
You can set it to turn one cooking zone off or more than one after the set time is up.
•
The timer maximum is 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
•
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not selecting
any cooking zone.
•
Touch the timer control, the timer indicator will flash ; Adjust the timer setting by
touch the “-” or “+” controls. The minute minder indicator will start flashing and
will show in the timer display.
Power level
1
2
3
4
5
6
7
8
9
Default working
timer (hour)
8
8
8
4
4
4
2
2
2
