PAGE 9
P
I
02 9604 1226 E
I
|
danielaappliances.com.au
2. During cooking process, press " " once to pause the cooking. Press " " twice to cancel
the cooking.
Energy-Saving Function
1. In waiting state and reminding state, press " " for three seconds, the LED display will go off
and set to energy-saving mode.
2. If no operation in 10 minutes under waiting state, the LED display will go off and go into
energy-saving mode.
3. Under the energy-saving mode, press any key or rotate any knob can quit the energy-saving
mode.
Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
1. Rotate " K1 " to select the pyrolytic function. LED will display " PyR ".
2. Press " " to confirm the cooking. And the default time is 2 hours, " PyR " will display on the
LED.
3. Rotate " K1 " to change the pyrolytic time. The timer can be set 1:30 or 2:00 hours.
Note:
1. When the oven door is not closed, pressing start button will be invalid, LED display " door ",
" PyR ".
2. When the oven's center temperature is highter than 320°C, pressing start button will be
invalid. The LED will display " CooL " and " PyR ". When the oven's center temperature is
lower than 200°C, press cancel button once , it will pause; press again, it will return to waiting
state. If highter than 200°C, press cancel button once, it will return to waiting state directly.
3. Open the door when the oven is working, the LED will display " door " and the buzzer will
sound continuously until the door was closed or press cancel button.
4. Before activating the pyrolytic cleaning function, remove any excessive spillage and make
sure that oven is empty. Do not leave anything inside it (e.g. pans, baking tray, dripping pan,
slider bracket etc.) as this could heavily damage them.
5. When finished pyrolytic cleaning, don't interrupt the power in an hour.