Danfoss VLZ065, Инструкции по применению

Страница: 37 / 54

Control logic
CDS oil boost function is based on time and
compressor speed. More advanced protection
can be done using a compressor equipped with
an optical oil level sensor and a logic embedded
in the unit controller. Details on optical oil level sensor in Product
information
Oil boost controlled by
optical oil level sensor
4
3
1
2
WD-00008
1 Drive
2 Optical oil level sensor
3 Oil management logic embedded in
unit controller
4 Modbus
Drive parameters Description Default Range
“28.10” Oil return management Enables/disables Oil Return Management Enable On / Off
“28.11” Low speed running Threshold for boost decision 120 min 1-1440 min
“28.12” Fixed boost interval Maximum time between oil return boosts 24h 1-168h
“28.13” Boost duration desired duration of oil boosts 60sec 10-255s
“28.15” ORM Min speed limit Minimum speed limit for trigger the ORM function 120Hz 90~180Hz
“28.17” ORM boost speed Boost speed for the ORM function 180Hz par. 28.14 to 330Hz
Drive parameters Description Default value
“28.10” Oil return management Disable (managed by unit controller) Enable
37
AB444226142054en-000101