Danfoss VLT5000 SyncPos, Руководство по эксплуатации

Страница: 207 / 236

Programmable SyncPos motion controller
MG.10.J8.02 – VLT is a registered Danfoss trade mark
206
Messages and Error Reference
■ ■
■ ■ ■
VLT and SyncPos Motion Controller messages
All messages are shown in the LCP display of the
VLT in short and in the SyncPos software in plain
text.
You can find brief information on the error messages
in the table or detailed information in the following
section.
■ ■ ■ ■ ■
Table of Messages
The tables contain the messages in numerical order.
Letters following a % sign represent variables which
can be used in plain text at the corresponding
locations.
O.ERR_ LCP-Display SyncPos message
3 AXES NOT IN SYSTEM Axis no. %bu not in system
5 ERROR NOT CLEARED Axis no: 1 Error not cleared
6 HOME NOT EXECUTED Axis no: 1 Failed to move to HOME position
7 H OM E_VE L Z E RO Axis no: 1 Home vel 0
8 POSITION E RROR Axis no: 1 Position error
9 INDEX NOT FOUND Axis no: 1 Index pulse (encoder) not found
10 UN KNOWN COM MAN D Unknown command
11 SOFTWAR E LIM IT ACT. Axis no.1 Software limit switch activated
12 ILLEGAL PARAMET. NO Illegal parameter number
13 General VLT error General VLT error
14 TOO MANY NEST. LOOP Too many nested loops
16 PARAM. ERROR E E PROM Parameters in EEPROM are corrupted
17 PROGR. E RROR E E P ROM Programs in EEPROM are corrupted
18 RESET BY CPU Reset by CPU
19 USER ABORT User abort
25 LIMIT SWITCH ACTIV. Axis no. 1 Limit switch activated
49 TOO MANY I NTER RU PTS Too many interrupt functions
51 TOO MANY NEST. GOSUB Too many nested GOSUB commands
52 TOO MANY RETU RN Too many RETURN commands
62 ERROR IN VE RI FYING E EPROM: address % defect
70 ERROR IN DIM COM MD Error in DIM command
71 ARRAYBOUNDS CROSSED Attempt was made to cross arraybounds
79 TI ME OUT WAITNDX Timeout while waiting for index
84 TOO MANY ONTIME Too many time interrupts
87 OUT OF MEMORY (VAR) No more room for variables
90 M E MORY locked The program memory is write-protected.
91 I LLEGAL CURVE ARRAY Curve array wrong
92 E NCOD E R ERROR Error from encoder monitoring
xx INTE RNAL E RROR Internal error ##