1.1.5 Available Literature for VLT HVAC Drive
-
Operating Instructions MG.11.Ax.yy provide the
necessary information for getting the frequency
converter up and running.
-
Operating Instructions VLT HVAC Drive High Power,
MG.11.Fx.yy
-
Design Guide MG.11.Bx.yy entails all technical
information about the frequency converter and
customer design and applications.
-
Programming Guide MG.11.Cx.yy provides
information on how to programme and includes
complete parameter descriptions.
-
Mounting Instruction, Analog I/O Option MCB 109,
MI.38.Bx.yy
-
Application Note, Temperature Derating Guide,
MN.11.Ax.yy
-
PC-based Configuration Tool MCT 10, MG.10.Ax.yy
enables the user to configure the frequency
converter from a Windows
™
based PC
environment.
-
Danfoss VLT
®
Energy Box software at
www.danfoss.com/BusinessAreas/DrivesSolutions
then choose PC Software Download
-
VLT HVAC Drive Drive Applications, MG.11.Tx.yy
-
Operating Instructions VLT HVAC Drive Profibus,
MG.33.Cx.yy
-
Operating Instructions VLT HVAC Drive Device Net,
MG.33.Dx.yy
-
Operating Instructions VLT HVAC Drive BACnet,
MG.11.Dx.yy
-
Operating Instructions VLT HVAC Drive LonWorks,
MG.11.Ex.yy
-
Operating Instructions VLT HVAC Drive Metasys,
MG.11.Gx.yy
-
Operating Instructions VLT HVAC Drive FLN,
MG.11.Zx.yy
-
Output Filter Design Guide, MG.90.Nx.yy
-
Brake Resistor Design Guide, MG.90.Ox.yy
x = Revision number
yy = Language code
Danfoss technical literature is available in print from your
local Danfoss Sales Office or online at:
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/TeDocumentation.htm
1.1.6 Definitions
Frequency converter:
I
VLT,MAX
Maximum output current.
I
VLT,N
Rated output current supplied by the frequency converter.
U
VLT, MAX
Maximum output voltage.
Input:
Control command
Start and stop the connected motor by means of LCP and
digital inputs.
Functions are divided into two groups.
Functions in group 1 have higher priority than functions in
group 2.
Group 1
Reset, Coasting stop, Reset and Coasting stop,
Quick-stop, DC braking, Stop and the [OFF] key.
Group 2
Start, Pulse start, Reversing, Start reversing, Jog and
Freeze output
Motor:
Motor Running
Torque generated on output shaft and speed from zero rpm
to max. speed on motor.
f
JOG
Motor frequency when the jog function is activated (via
digital terminals).
f
M
Motor frequency.
f
MAX
Maximum motor frequency.
f
MIN
Minimum motor frequency.
f
M,N
Rated motor frequency (nameplate data).
I
M
Motor current (actual).
I
M,N
Rated motor current (nameplate data).
n
M,N
Rated motor speed (nameplate data).
n
s
Synchronous motor speed
ns =
2 ×
par. 1 − 23 × 60 s
par. 1 − 39
P
M,N
Rated motor power (nameplate data in kW or HP).
T
M,N
Rated torque (motor).
Introduction
VLT
®
HVAC Drive Programming Guide
6
MG.11.CB.02 - VLT
®
is a registered Danfoss trademark
1
1
Содержание VLT
Страница 1: ...MAKING MODERN LIVING POSSIBLE Programming Guide VLT HVAC Drive...
Страница 230: ...www danfoss com drives MG11CB02 130R0318 MG11CB02 Rev 2010 09 10...
Страница 231: ......