![background image](http://html1.mh-extra.com/html/danfoss/vlt-series/vlt-series_programming-manual_3460644097.webp)
3.12 Main Menu - LonWorks - Group 11
Parameter group for all LonWorks specific parameters.
Parameters related to LonWorks ID.
11-00 Neuron ID
Range:
Function:
0
*
[0 - 0 ] View the Neuron chip's unique Neuron ID number.
11-10 Drive Profile
Option:
Function:
This parameter allows selecting between
LONMARK Functional Profiles.
[0]
*
VSD profile
The Danfoss Profile and the Node Object
are common for all profiles.
[1]
Pump controller
11-15 LON Warning Word
Range:
Function:
0
*
[0 - 65535 ] This parameter contains the LON specific
warnings.
Bit
Status
0
Internal fault
1
Internal fault
2
Internal fault
3
Internal fault
4
Internal fault
5
Reserved
6
Reserved
7
Reserved
8
Reserved
9
Changeable types
10
Initialization error
11
Internal communication error
12
Software revision mismatch
13
Bus not active
14
Option not present
15
LON input (nvi/nci) exceeds limits
11-17 XIF Revision
Range:
Function:
0
*
[0 - 0 ] This parameter contains the version of the external
interface file on the Neuron C chip on the LON
option.
11-18 LonWorks Revision
Range:
Function:
0
*
[0 - 0 ] This parameter contains the software version of the
application program on the Neuron C chip on the
LON option.
11-21 Store Data Values
Option:
Function:
This parameter is used to activate storing of
data in non-volatile memory.
[0]
*
Off
Store function is inactive.
[2]
Store all
setups
Stores all parameter values in the E
2
PROM.
The value returns to
Off
when all parameter
values have been stored.
Parameter Description
VLT
®
HVAC Drive Programming Guide
96
MG.11.CC.02 - VLT
®
is a registered Danfoss trademark
3
3