Danfoss VLT MSD 510, Руководство по эксплуатации

Страница: 29 / 246

e
3
0
b
g
5
7
0
.1
0
Illustration 8: Type Code
Table 4: Legend to Type Code
[01–06] Product group [22–23] DC voltage [32–34] Firmware
MSD510
VLT
®
Multiaxis Servo Drive
D6 600 V DC-link voltage SXX Standard
[07–12] Product variant [24–26] Drive enclosure SC0 Customized
SDM511 MSD 510 Servo Drive Module 511 E20
IP20 (1)
[35] Safety
SDM512 MSD 510 Servo Drive Module 512
[27–29] Bus system
T Safe torque off (STO)
[13–14] Drive variant
FXX
Without feedback (2)
[36–40] Reserved
SA Single axis servo drive FRX Resolver XXXXX Reserved
DA Double axis servo drive FS1 BiSS ST feedback, 17 bit
[15–16] Enclosure (frame) size
FM1 BiSS MT feedback, 17 bit
F1 Enclosure (frame) size 1, 50 mm FE1 EnDat 2.1
F2 Enclosure (frame) size 2, 100 mm FE2 EnDat 2.2
[17–21] Current rating
FHF
HIPERFACE®
(2)
C02A5 2.5 A
rms
FHD
HIPERFACE® DSL (2)
C005A 5 A
rms
[30–31] Bus system
C010A 10 A
rms
PL POWERLINK
C020A 20 A
rms
EC EtherCAT
C040A 40 A
rms
PN PROFINET
1
IP20 according to IEC/EN 60529 (except connectors, which are IP00)
2
In preparation
3.3.3 Components
3.3.3.1 Cooling
The Servo Drive Modules SDM 511 and SDM 512 are cooled by a speed-controlled internal fan.
3.3.4 Connectors on SDM 511
This section details all connectors on the SDM 511 in enclosure sizes 1 (FS1, 50 mm) and 2 (FS2, 100 mm).
System Description
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170| 29
Danfoss A/S © 2019.10