Danfoss VLT MSD 510, Руководство по эксплуатации

Страница: 101 / 246

• DDS_Drive
-
Contains program organization units (POUs) defined by PLCopen
®
(name starting with MC_) and POUs defined by Danfoss
(name starting with DD_). The Danfoss POUs provide additional functionality for the axis.
- It is possible to combine POUs defined by PLCopen
®
with POUs defined by Danfoss.
- The names of the POUs that target the SDM 511/SDM 512 drive modules and servo drives all end with _DDS.
• DDS_PSM
-
Contains POUs defined by Danfoss (name starting with DD_) and provide the functionality for the Power Supply Module
(PSM 510).
- The names of the POUs that target the PSM 510 all end with _PSM.
• DDS_DAM
-
Contains POUs defined by Danfoss (name starting with DD_) and provide the functionality for the Decentral Access
Module (DAM 510).
- The names of the POUs that target the DAM 510 all end with _DAM.
• DDS_ACM
-
Contains POUs defined by Danfoss (name starting with DD_) and provide the functionality for the Auxiliary Capacitors
Module (ACM 510).
- The names of the POUs that target the ACM 510 all end with _ACM.
• DDS_BasCam
-
Contains POUs for the creation of basic CAMs.
• DDS_LabCam
-
Contains POUs for the creation of labeling CAMs.
• DDS_Intern
-
Contains POUs that are needed internally for the libraries.
- Do not use these POUs in an application.
When integrating the VLT® Multiaxis Servo Drive library, some standard libraries are integrated automatically, unless they are
already part of the project.
NOTICE
-
Do not remove these libraries otherwise the DDS libraries will not work.
6.12.4 Constants within the DDS_Drive Library
Inside the library, the following lists of constants are defined:
Commissioning
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170| 101
Danfoss A/S © 2019.10