background image

2.3 Safety Precautions

WARNING

UNINTENDED START
When the drive is connected to the AC mains, DC supply, or load sharing, the motor may start at any time, causing risk of death,
serious injury, and equipment or property damage. The motor may start by activation of an external switch, a fieldbus
command, an input reference signal from the LCP or LOP, via remote operation using MCT 10 Set-up software, or after a cleared
fault condition.

-

Press [Off] on the LCP before programming parameters.

-

Disconnect the drive from the mains whenever personal safety considerations make it necessary to avoid unintended
motor start.

-

Check that the drive, motor, and any driven equipment are in operational readiness.

WARNING

LACK OF SAFETY AWARENESS
This document gives important information on how to prevent injury and damage to the equipment or the system. Ignoring
them can lead to death, serious injury, or severe damage to the equipment.

-

Make sure to fully understand the dangers and safety measures incurred in the application.

Safety

Installation Guide  | VLT® Programmable I/O MCB 115

AN295938195323en-000101 / 130R0655| 7

Danfoss A/S © 2020.01

Содержание VLT MCB 115

















Отзывы: