![background image](http://html.mh-extra.com/html/danfoss/vlt-mca-117/vlt-mca-117_operating-manual_508267015.webp)
e3
0b
h5
98
.1
0
53
50
10 V
42
42
53
60
50
10 V
55
Gnd
55
Gnd
FCD300
FCD302
Analog
I/O
2
9
7
8
1
FCM300
1
2
ON
S202
A53 switch
OFF = 0‐10V
Illustration 9: Analog I/O Cable Connections
The 0–10 V analog input 53 of the FCD 300 is converted into the FCD 302 analog input 53. The analog input 53 of the FCD 302 can be
set to 0–10 V or 0–20 mA via switch S201. From factory, the switch is set in OFF position, which sets the analog input to 0–10 V.
Relay cable connections
The relays of the FCD 302 are compatible to the relays in FCD 300.
NOTICE
The relay in FCM 300 is rated to a resistive load of 5 A, 250 V AC, whereas the relay in FCD 302 is rated to a load of 2 A, 240 V AC.
01
C
02
NO
03
NC
01
C
02
NO
03
NC
FCD 300
FCD 302
Relay
1
x102
2
x102
3
x102
FCM 300
e3
0b
h6
07
.1
0
Illustration 10: Relay Cable Connections
PROFIBUS cable connections
The PROFIBUS terminals of the FCD 300/FCM 300 are all converted to the PROFIBUS terminals of the FCD 302. The compensation coils
activated by the switches S101 to S104 of the FCD 300 are not needed in the FCD 302 PROFIBUS interface. The Termination of the
PROFIBUS line is done via the PROFIBUS termination switch.
Installation
Operating Guide | VLT® FCD 300 PROFIBUS Converter MCA 117
AQ289550754901en-000101 / 130R0890| 15
Danfoss A/S © 2019.11