Danfoss VLT HVAC Drive FC 100 Series, Руководство по программированию, Страница: 110 / 122

5.1.10 13-** Smart Logic
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
13-0* SLC Settings
13-00 SL Controller Mode
[0] Off 1 set-up TRUE - Uint8
13-01 Start Event [39] Start command 1 set-up TRUE - Uint8
13-02 Stop Event [40] Drive stopped 1 set-up TRUE - Uint8
13-03 Reset SLC [0] Do not reset SLC 1 set-up TRUE - Uint8
13-1* Comparators
13-10 Comparator Operand
[0] Disabled 1 set-up TRUE - Uint8
13-11 Comparator Operator [1] Approx.Equal (~) 1 set-up TRUE - Uint8
13-12 Comparator Value 0 N/A 1 set-up TRUE -1 Int32
13-2* Timers
13-20 SL Controller Timer
0 s 1 set-up TRUE -2 Uint32
13-4* Logic Rules
13-40 Logic Rule Boolean 1
[0] False 1 set-up TRUE - Uint8
13-41 Logic Rule Operator 1 [0] Disabled 1 set-up TRUE - Uint8
13-42 Logic Rule Boolean 2 [0] False 1 set-up TRUE - Uint8
13-43 Logic Rule Operator 2 [0] Disabled 1 set-up TRUE - Uint8
13-44 Logic Rule Boolean 3 [0] False 1 set-up TRUE - Uint8
13-5* States
13-51 SL Controller Event
[0] False 1 set-up TRUE - Uint8
13-52 SL Controller Action [0] Disabled 1 set-up TRUE - Uint8
Table 5.11
Parameter Lists
VLT
®
HVAC Basic Drive Programming Guide
5-10 MG18B222 - VLT
®
is a registered Danfoss trademark
5 5