Danfoss VLT HVAC Drive FC 100 Series, Руководство по программированию, Страница: 109 / 122

5.1.9 8-** Comm. and Options
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
8-0* General Settings
8-01
Control Site [0] Digital and ctrl.word All set-ups TRUE - Uint8
8-02 Control Source [1] FC Port All set-ups TRUE - Uint8
8-03 Control Timeout Time 1 s 1 set-up TRUE -1 Uint16
8-04 Control Timeout Function [0] Off 1 set-up TRUE - Uint8
8-3* FC Port Settings
8-30
Protocol [0] FC 1 set-up TRUE - Uint8
8-31 Address 1 N/A 1 set-up TRUE 0 Uint8
8-32 Baud Rate ExpressionLimit 1 set-up TRUE - Uint8
8-33 Parity / Stop Bits ExpressionLimit 1 set-up TRUE - Uint8
8-35 Minimum Response Delay 0.01 s 1 set-up TRUE -3 Uint16
8-36 Maximum Response Delay ExpressionLimit 1 set-up TRUE -3 Uint16
8-37 Maximum Inter-char delay 0.025 s 1 set-up TRUE -3 Uint16
8-4* FC MC protocol set
8-43
PCD Read Configuration ExpressionLimit 1 set-up TRUE - Uint8
8-5* Digital/Bus
8-50
Coasting Select [3] Logic OR All set-ups TRUE - Uint8
8-51 Quick Stop Select [3] Logic OR All set-ups TRUE - Uint8
8-52 DC Brake Select ExpressionLimit All set-ups TRUE - Uint8
8-53 Start Select [3] Logic OR All set-ups TRUE - Uint8
8-54 Reversing Select [0] Digital input All set-ups TRUE - Uint8
8-55 Set-up Select [3] Logic OR All set-ups TRUE - Uint8
8-56 Preset Reference Select [3] Logic OR All set-ups TRUE - Uint8
8-7* BACnet
8-70
BACnet Device Instance 1 N/A 1 set-up TRUE 0 Uint32
8-72 MS/TP Max Masters 127 N/A 1 set-up TRUE 0 Uint8
8-73 MS/TP Max Info Frames 1 N/A 1 set-up TRUE 0 Uint16
8-74 "I am" Service [0] Send at power-up 1 set-up TRUE - Uint8
8-75 Intialisation Password [admin] 1 set-up TRUE 0 VisStr[21]
8-8* FC Port Diagnostics
8-80
Bus Message Count 0 N/A 1 set-up TRUE 0 Uint32
8-81 Bus Error Count 0 N/A 1 set-up TRUE 0 Uint32
8-82 Slave Messages Rcvd 0 N/A 1 set-up TRUE 0 Uint32
8-83 Slave Error Count 0 N/A 1 set-up TRUE 0 Uint32
8-84 Slave Messages Sent 0 N/A 1 set-up TRUE 0 Uint32
8-85 Slave Timeout Errors 0 N/A 1 set-up TRUE 0 Uint32
8-88 Reset FC port Diagnostics [0] Do not reset 1 set-up TRUE - Uint8
8-9* Bus Feedback
8-94
Bus Feedback 1 0 N/A All set-ups TRUE 0 Int16
Table 5.10
Parameter Lists
VLT
®
HVAC Basic Drive Programming Guide
MG18B222 - VLT
®
is a registered Danfoss trademark 5-9
5 5