Danfoss VLT HVAC Drive FC 100 Series, Руководство по программированию, Страница: 107 / 122

5.1.7 5-** Digital In/Out
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
5-0* Digital I/O mode
5-00
Digital Input Mode [0] PNP 1 set-up FALSE - Uint8
5-03 Digital Input 29 Mode [0] PNP 1 set-up FALSE - Uint8
5-1* Digital Inputs
5-10
Terminal 18 Digital Input [8] Start All set-ups TRUE - Uint8
5-11 Terminal 19 Digital Input [0] No operation All set-ups TRUE - Uint8
5-12 Terminal 27 Digital Input ExpressionLimit All set-ups TRUE - Uint8
5-13 Terminal 29 Digital Input [14] Jog All set-ups TRUE - Uint8
5-3* Digital Outputs
5-34
On Delay, Digital Output 0.01 s All set-ups TRUE -2 uint16
5-35 Off Delay, Digital Output 0.01 s All set-ups TRUE -2 uint16
5-4* Relays
5-40
Function Relay ExpressionLimit All set-ups TRUE - Uint8
5-41 On Delay, Relay 0.01 s All set-ups TRUE -2 Uint16
5-42 Off Delay, Relay 0.01 s All set-ups TRUE -2 Uint16
5-5* Pulse Input
5-50
Term. 29 Low Frequency 4 Hz All set-ups TRUE 0 Uint32
5-51 Term. 29 High Frequency 32000 Hz All set-ups TRUE 0 Uint32
5-52 Term. 29 Low Ref./Feedb. Value 0 N/A All set-ups TRUE -3 Int32
5-53 Term. 29 High Ref./Feedb. Value 50 N/A All set-ups TRUE -3 Int32
5-9* Bus Controlled
5-90
Digital & Relay Bus Control 0 N/A All set-ups TRUE 0 Uint32
Table 5.8
Parameter Lists
VLT
®
HVAC Basic Drive Programming Guide
MG18B222 - VLT
®
is a registered Danfoss trademark 5-7
5 5