Danfoss VLT HVAC Drive FC 100 Series, Руководство по программированию, Страница: 106 / 122

5.1.6 4-** Limits/Warnings
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
4-1* Motor Limits
4-10
Motor Speed Direction [2] Both directions All set-ups FALSE - Uint8
4-12 Motor Speed Low Limit [Hz] 0 Hz All set-ups FALSE -1 Uint16
4-14 Motor Speed High Limit [Hz] 65 Hz All set-ups FALSE -1 Uint16
4-18 Current Limit 110 % All set-ups TRUE 0 Uint16
4-19 Max Output Frequency ExpressionLimit All set-ups FALSE -1 Uint16
4-4* Adj. Warnings 2
4-40
Warning Freq. Low ExpressionLimit All set-ups TRUE -1 uint16
4-41 Warning Freq. High ExpressionLimit All set-ups TRUE -1 uint16
4-5* Adj. Warnings
4-50
Warning Current Low 0 A All set-ups TRUE -2 Uint32
4-51 Warning Current High ExpressionLimit All set-ups TRUE -2 Uint32
4-54 Warning Reference Low -4999 N/A All set-ups TRUE -3 Int32
4-55 Warning Reference High 4999 N/A All set-ups TRUE -3 Int32
4-56 Warning Feedback Low -4999 ProcessCtrlUnit All set-ups TRUE -3 Int32
4-57 Warning Feedback High 4999 ProcessCtrlUnit All set-ups TRUE -3 Int32
4-58 Missing Motor Phase Function [1] On All set-ups FALSE - Uint8
4-6* Speed Bypass
4-61
Bypass Speed From [Hz] 0 Hz All set-ups TRUE -1 Uint16
4-63 Bypass Speed To [Hz] 0 Hz All set-ups TRUE -1 Uint16
4-64 Semi-Auto Bypass Set-up [0] Off All set-ups TRUE - Uint8
Table 5.7
Parameter Lists
VLT
®
HVAC Basic Drive Programming Guide
5-6 MG18B222 - VLT
®
is a registered Danfoss trademark
5 5