Danfoss VLT HVAC Drive FC 100 Series, Руководство по программированию, Страница: 102 / 122

5.1.2 0-** Operation / Display
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
0-0* Basic Settings
0-01
Language [0] English 1 set-up TRUE - Uint8
0-03 Regional Settings ExpressionLimit 1 set-up FALSE - Uint8
0-04 Operating State at Power-up [0] Resume All set-ups TRUE - Uint8
0-06 GridType ExpressionLimit 1 set-up FALSE - Uint8
0-07 Auto DC Braking [1] On 1 set-up FALSE - Uint8
0-1* Set-up Operations
0-10
Active Set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Programming Set-up [9] Active Set-up 1 set-up TRUE - Uint8
0-12 Link Setups [20] Linked All set-ups FALSE - Uint8
0-3* LCP Custom Readout
0-30
Custom Readout Unit [1] % 1 set-up TRUE - Uint8
0-31 Custom Readout Min Value 0 CustomReadoutUnit 1 set-up TRUE -2 Int32
0-32 Custom Readout Max Value 100 CustomReadoutUnit 1 set-up TRUE -2 Int32
0-37 Display Text 1 [] 1 set-up TRUE 0 VisStr[21]
0-38 Display Text 2 [] 1 set-up TRUE 0 VisStr[26]
0-39 Display Text 3 [] 1 set-up TRUE 0 VisStr[26]
0-4* LCP Keypad
0-40
[Hand on] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-42 [Auto on] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-44 [Off/Reset] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-5* Copy/Save
0-50
LCP Copy [0] No copy 1 set-up FALSE - Uint8
0-51 Set-up Copy [0] No copy 1 set-up FALSE - Uint8
0-6* Password
0-60
Main Menu Password 0 N/A 1 set-up TRUE 0 Uint16
Table 5.3
Parameter Lists
VLT
®
HVAC Basic Drive Programming Guide
5-2 MG18B222 - VLT
®
is a registered Danfoss trademark
5 5