[80]
PTC Card 1
[120]
Lead Pump Start
[121]
Lead Pump Alternation
[130]
Pump 1 Interlock
[131]
Pump 2 Interlock
[132]
Pump 3 Interlock
5-14 Terminal 32 Digital Input
Option:
Function:
[0] *
No Operation
Same options and functions as parameter group 5-1*
Digital Inputs
, except for
Pulse input
.
5-15 Terminal 33 Digital Input
Option:
Function:
[0] *
No Operation
Same options and functions as parameter group 5-1*
Digital Inputs
.
5-40 Function Relay
Array [8]
(Relay 1 [0], Relay 2 [1]
Option MCB 105: Relay 7 [6], Relay 8 [7] and Relay 9 [8]).
Select options to define the function of the relays.
The selection of each mechanical relay is realised in an array parameter.
Option:
Function:
[0] *
No operation
[1]
Control ready
[2]
Drive ready
[3]
Drive rdy/rem ctrl
[4]
Standby / no warning
[5] *
Running
Default setting for relay 2.
[6]
Running / no warning
[8]
Run on ref/no warn
[9] *
Alarm
Default setting for relay 1.
[10]
Alarm or warning
[11]
At torque limit
[12]
Out of current range
[13]
Below current, low
[14]
Above current, high
[15]
Out of speed range
[16]
Below speed, low
[17]
Above speed, high
[18]
Out of feedb. range
[19]
Below feedback, low
[20]
Above feedback, high
[21]
Thermal warning
[25]
Reverse
[26]
Bus OK
[27]
Torque limit & stop
[28]
Brake, no brake war
[29]
Brake ready, no fault
[30]
Brake fault (IGBT)
6 How to Programme
VLT HVAC Drive High Power Operating In-
structions
114
MG.11.F3.02 - VLT
®
is a registered Danfoss trademark
6