Danfoss VLT AutomationDrive FC 302, Руководство по программированию, Страница: 265 / 346

5.2 Parameter Lists and Options, Software Version 8.10 (Standard)
5.2.1 0-** Operation / Display
Par.
No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion index
Type
0-0* Basic Settings
0-01 Language [0] English 1 set-up TRUE - Uint8
0-02 Motor Speed Unit ExpressionLimit 2 set-ups FALSE - Uint8
0-03 Regional Settings ExpressionLimit 2 set-ups FALSE - Uint8
0-04 Operating State at Power-up (Hand) [1] Forced stop, ref=old All set-ups TRUE - Uint8
0-09 Performance Monitor 0 % All set-ups TRUE -1 Uint16
0-1* Set-up Operations
0-10 Active Set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Edit Set-up [1] Set-up 1 All set-ups TRUE - Uint8
0-12 This Set-up Linked to [0] Not linked All set-ups FALSE - Uint8
0-13 Readout: Linked Set-ups 0 N/A All set-ups FALSE 0 Uint16
0-14 Readout: Edit Set-ups / Channel 0 N/A All set-ups TRUE 0 Int32
0-15 Readout: actual setup 0 N/A All set-ups FALSE 0 Uint8
0-2* LCP Display
0-20 Display Line 1.1 Small ExpressionLimit All set-ups TRUE - Uint16
0-21 Display Line 1.2 Small 1614 All set-ups TRUE - Uint16
0-22 Display Line 1.3 Small 1610 All set-ups TRUE - Uint16
0-23 Display Line 2 Large 1613 All set-ups TRUE - Uint16
0-24 Display Line 3 Large 1602 All set-ups TRUE - Uint16
0-25 My Personal Menu ExpressionLimit 1 set-up TRUE 0 Uint16
0-3* LCP Custom Readout
0-30 Unit for User-defined Readout [0] None All set-ups TRUE - Uint8
0-31 Min Value of User-defined Readout 0 CustomReadoutUnit All set-ups TRUE -2 Int32
0-32 Max Value of User-defined Readout 100 CustomReadoutUnit All set-ups TRUE -2 Int32
0-33 Source for User-defined Readout [240] Default Source All set-ups TRUE - Uint8
0-37 Display Text 1 0 N/A 1 set-up TRUE 0
VisStr[
25]
0-38 Display Text 2 0 N/A 1 set-up TRUE 0
VisStr[
25]
0-39 Display Text 3 0 N/A 1 set-up TRUE 0
VisStr[
25]
0-4* LCP Keypad
0-40 [Hand on] Key on LCP ExpressionLimit All set-ups TRUE - Uint8
0-41 [Off] Key on LCP ExpressionLimit All set-ups TRUE - Uint8
0-42 [Auto on] Key on LCP ExpressionLimit All set-ups TRUE - Uint8
0-43 [Reset] Key on LCP ExpressionLimit All set-ups TRUE - Uint8
0-44 [Off/Reset] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-45 [Drive Bypass] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-5* Copy/Save
0-50 LCP Copy [0] No copy All set-ups FALSE - Uint8
0-51 Set-up Copy [0] No copy All set-ups FALSE - Uint8
0-6* Password
0-60 Main Menu Password 100 N/A 1 set-up TRUE 0 Int16
0-61 Access to Main Menu w/o Password [0] Full access 1 set-up TRUE - Uint8
0-65 Personal Menu Password 200 N/A 1 set-up TRUE 0 Int16
0-66 Access to Personal Menu w/o Password [0] Full access 1 set-up TRUE - Uint8
0-67 Bus Password Access 0 N/A All set-ups TRUE 0 Uint16
0-68 Safety Parameters Password 300 N/A 1 set-up TRUE 0 Uint16
0-69 Password Protection of Safety Parameters [0] Disabled 1 set-up TRUE - Uint8
Parameter Lists Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 263
5 5