![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840492.webp)
Parameter 15-58 Smart Setup Filename
Table 799: Parameter 15-58 Smart Setup Filename
15-58 Smart Setup Filename
Default value: Size related
Parameter type: Range, 0 - 20
Setup: All setups
Conversion index: 0
Data type: VisStr[16]
Change during operation: True
Shows the SmartStart file name.
Parameter 15-59 Filename
Table 800: Parameter 15-59 Filename
15-59 Filename
Default value: Size related
Parameter type: Range, 0 - 20
Setup: All setups
Conversion index: 0
Data type: VisStr[16]
Change during operation: False
Shows the currently used customer-specific initial values (CSIV) file name.
5.15.11 15-6* Option Ident.
This read-only parameter group contains information about the hardware and software configuration of the options installed in
slots A, B, C0, and C1.
Parameter 15-60 Option Mounted
Table 801: Parameter 15-60 Option Mounted
15-60 Option Mounted
Default value: 0
Parameter type: Range, 0 - 30, Array [8]
Setup: All setups
Conversion index: 0
Data type: VisStr[30]
Change during operation: False
Shows the type of installed option.
Parameter 15-61 Option SW Version
Table 802: Parameter 15-61 Option SW Version
15-61 Option SW Version
Default value: 0
Parameter type: Range, 0 - 20, Array [8]
Setup: All setups
Conversion index: 0
Data type: VisStr[20]
Change during operation: False
View the installed option software version.
Parameter 15-62 Option Ordering No
Table 803: Parameter 15-62 Option Ordering No
15-62 Option Ordering No
Default value: 0
Parameter type: Range, 0 - 8, Array [8]
Setup: All setups
Conversion index: 0
Data type: VisStr[8]
Change during operation: False
Shows the code number for the installed options.
AU275636650261en-000101 / 130R0334
492 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide