![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840474.webp)
5.14.8 14-7* Compatibility
Parameters for compatibility of VLT 3000 and VLT 5000 with FC 300.
Parameter 14-72 Legacy Alarm Word
Table 753: Parameter 14-72 Legacy Alarm Word
14-72 Legacy Alarm Word
Default value: 0
Parameter type: Range, 0 - 4294967295
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: False
Readout of the alarm word corresponding to VLT 5000.
Parameter 14-73 Legacy Warning Word
Table 754: Parameter 14-73 Legacy Warning Word
14-73 Legacy Warning Word
Default value: 0
Parameter type: Range, 0 - 4294967295
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: False
Readout of the warning word corresponding to VLT 5000.
Parameter 14-74 Leg. Ext. Status Word
Table 755: Parameter 14-74 Leg. Ext. Status Word
14-74 Leg. Ext. Status Word
Default value: 0
Parameter type: Range, 0 - 4294967295
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: False
Readout of the external status word corresponding to VLT 5000.
5.14.9 14-8* Options
Parameter 14-80 Option Supplied by External 24VDC
Table 756: Parameter 14-80 Option Supplied by External 24VDC
14-80 Option Supplied by External 24VDC
Default value: [1] Yes
Parameter type: Option
Setup: 2 setups
Conversion index: -
Data type: Uint8
Change during operation: False
N O T I C E
To make the parameter change function, perform a power cycle.
Option Name Description
[0]
No
Select this option to use the 24 V DC supply of the drive.
[1]*
Yes
Select this option if a 24 V DC external supply is used to power the option. Inputs/outputs are galvanically
isolated from the drive when operated from an external supply.
AU275636650261en-000101 / 130R0334
474 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide