manualshive.com logo in svg

Danfoss VLT AutomationDrive FC 301, Руководство по программированию, Страница: 445 / 722

Поделиться
Скачать
Danfoss VLT AutomationDrive FC 301 Скачать руководство пользователя страница 445

•
•
•

Option Name

Description

Selects the absolute position mode instead of the relative position mode.

[126]

Activate touch

N O T I C E

This option is available only with software version 48.20 and newer.

Activates the touch probe positioning mode.

[127]

Deactivate touch

N O T I C E

This option is available only with software version 48.20 and newer.

Deactivates the touch probe positioning mode.

[128]

Target inverse

N O T I C E

This option is available only with software version 48.20 and newer.

Changes the sign of the active target position value.

[129]

Target

N O T I C E

This option is available only with software version 48.20 and newer.

The active target position is not changed.

[130]

Act. speed mode

N O T I C E

This option is available only with software version 48.20 and newer.

Activates the speed mode when option 

[9] Positioning

 or option 

[10] Synchronization

 is selected

in 

parameter 1-00 Configuration Mode

.

[131]

Deact. speed mode

N O T I C E

This option is available only with software version 48.20 and newer.

Deactivates the speed mode and activates the option selected in 

parameter 1-00 Configuration

Mode

.

5.13.6 13-9* User-defined Alerts and Readouts

Parameters in this group allow the configuration of application-specific triggers for triggering the drive to perform a certain action,
show the status on the LCP, and represent it accordingly in 

parameter 13-97 Alert Alarm Word

, 

parameter 13-98 Alert Warning Word

,

and 

parameter 13-99 Alert Status Word

. In 

parameter 13-91 Alert Action

, it is possible to select drive functionalities such as 

info only

,

stop

, 

running to max

, and 

force drive to trip

.

Use the following parameters to configure the drive to show a message and perform an action when a specific event occurs:

Parameter 13-90 Alert Trigger

 – the event that triggers the user-defined action and message.

Parameter 13-91 Alert Action

 – the action that the drive performs when the event defined in 

parameter 13-90 Alert Trigger

 occurs.

Parameter 13-92 Alert Text

 – the text that the drive shows in the display when the event defined in 

parameter 13-90 Alert Trigger

occurs.

AU275636650261en-000101 / 130R0334 | 445

Danfoss A/S © 2022.12

Parameter Descriptions

VLT AutomationDrive FC 301/302

Programming Guide

Содержание VLT AutomationDrive FC 301



















































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов