![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840340.webp)
Parameter 10-34 DeviceNet Product Code
Table 600: Parameter 10-34 DeviceNet Product Code
10-34 DeviceNet Product Code
Default value: Size related
Parameter type: Range, 0 - 65535
Setup: 1 setup
Conversion index: 0
Data type: Uint16
Change during operation: True
Use this parameter for reading out the actual DeviceNet product code.
Parameter 10-39 Devicenet F Parameters
Table 601: Parameter 10-39 Devicenet F Parameters
10-39 Devicenet F Parameters
Default value: 0
Parameter type: Range, 0 - 0
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation:
Use this parameter to configure the drive via DeviceNet and build the EDS file.
5.11.5 10-5* CANopen
Parameter 10-50 Process Data Config Write
Table 602: Parameter 10-50 Process Data Config Write
10-50 Process Data Config Write
Default value: Size related
Parameter type: Option, Array [81]
Setup: All setups
Conversion index: –
Data type: Uint16
Change during operation: True
Only elements [2] and [3] of this array can be selected. [0] and [1] are fixed.
Option
Name
Description
[-]
None
[109]
Mode of operation
[302]
Minimum reference
[303]
Maximum reference
[312]
Catch up/slow down value
[321]
Touch target
[322]
Master scale numerator
[323]
Master scale denominator
[326]
Master Offset
[328]
Master offset speed ref
[341]
Ramp 1 ramp up time
[342]
Ramp 1 ramp down time
[351]
Ramp 2 ramp up time
[352]
Ramp 2 ramp down time
AU275636650261en-000101 / 130R0334
340 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide