![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840338.webp)
Parameter 10-15 Net Control
Table 591: Parameter 10-15 Net Control
10-15 Net Control
Default value: [0] Off
Parameter type: Option
Setup: 2 setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the control source in instances 21/71 and 20/70.
Option
Name
Description
[0]*
Off
[1]
On
5.11.3 10-2* COS Filters
Parameter 10-20 COS Filter 1
Table 592: Parameter 10-20 COS Filter 1
10-20 COS Filter 1
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
Sets up the filter mask for the status word. When operating in COS (change-of-state), it is possible to filter out bits in the status word
that should not be sent if they change.
Parameter 10-21 COS Filter 2
Table 593: Parameter 10-21 COS Filter 2
10-21 COS Filter 2
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
Sets up the filter mask for the main actual value. When operating in COS (change-of-state), it is possible to filter out bits in the main
actual value that should not be sent if they change.
Parameter 10-22 COS Filter 3
Table 594: Parameter 10-22 COS Filter 3
10-22 COS Filter 3
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
Sets up the filter mask for PCD 3. When operating in COS (change-of-state), it is possible to filter out bits in PCD 3 that should not be
sent if they change.
Parameter 10-23 COS Filter 4
Table 595: Parameter 10-23 COS Filter 4
10-23 COS Filter 4
Default value: 0
Parameter type: Range, 0 - 65535
Setup: All setups
Conversion index: 0
Data type: Uint16
Change during operation: False
AU275636650261en-000101 / 130R0334
338 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide