![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840209.webp)
Option
Name
Description
[233]
In Power Limit
[234]
PE power off
[246]
Emcy mode was act.
[247]
Emergency mode
[249]
Emcy m. OPR unexpected
[250]
Emcy mode limits
[254]
Testing emcy mode
Parameter 5-31 Terminal 29 Digital Output
Table 357: Parameter 5-31 Terminal 29 Digital Output
5-31 Terminal 29 Digital Output
Default value: Size related
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
The options for this parameter are the same as those listed for
parameter 5-30 Terminal 27 Digital Output
.
Parameter 5-32 Term X30/6 Digi Out (MCB 101)
Table 358: Parameter 5-32 Term X30/6 Digi Out (MCB 101)
5-32 Term X30/6 Digi Out (MCB 101)
Default value: Size related
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
This parameter is active when option module VLT® General Purpose I/O MCB 101 is mounted in the drive. The options for this pa-
rameter are the same as those listed for
parameter 5-30 Terminal 27 Digital Output
.
Table 359: Parameter 5-33 Term X30/7 Digi Out (MCB 101)
5-33 Term X30/7 Digi Out (MCB 101)
Default value: Size related
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
This parameter is active when option module VLT® General Purpose I/O MCB 101 is mounted in the drive. The options for this pa-
rameter are the same as those listed for
parameter 5-30 Terminal 27 Digital Output
.
5.6.4 5-4* Relays
Parameters for configuring the timing and the output functions for the relays.
Parameter 5-40 Function Relay
Table 360: Parameter 5-40 Function Relay
5-40 Function Relay
Default value: Size related
Parameter type: Option, Array [9]
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select options to define the function of the relays. Relay 1 [0], relay 2 [1]. With VLT® Extended Relay Card MCB 113 installed: Relay 3
[2], Relay 4 [3], Relay 5 [4], Relay 6 [5]. With VLT® Relay Card MCB 105 installed: Relay 7 [6], relay 8 [7], Relay 9 [8].
AU275636650261en-000101 / 130R0334 | 209
Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide