![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840012.webp)
1 Introduction
1.1 Supported Software Versions
Supported software versions: 9.12 and 48.9X
This programming guide can be used for all FC 301 and FC 302 drives, and for VLT® Decentral Drive FCD 302. The software version
number can be read from
parameter 15-43 Software Version
.
1.2 Integrated Motion Controller
The integrated motion controller (IMC) enables position control. For more information about IMC, refer to the
Chapter Integrated
Motion Controller
.
AU275636650261en-000101 / 130R0334
12 | Danfoss A/S © 2022.12
Introduction
VLT AutomationDrive FC 301/302
Programming Guide