Danfoss VLT AutomationDrive FC 300, Инструкция по эксплуатации, Страница: 52 / 98

Parameter International
default parameter
value
North American
default parameter
value
4-13 Motor Speed
High Limit [RPM]
See Note 3 1,500 RPM 1,800 RPM
4-14 Motor Speed
High Limit [Hz]
See Note 4 50 Hz 60 Hz
4-19 Max Output
Frequency 100 Hz 120 Hz
4-53 Warning Speed
High 1,500 RPM 1,800 RPM
5-12 Terminal 27
Digital Input Coast inverse External interlock
5-40 Function Relay Alarm No alarm
6-15 Terminal 53
High Ref./Feedb.
Value 50 60
6-50 Terminal 42
Output Speed 0-HighLim Speed 4–20 mA
14-20 Reset Mode Manual reset Infinite auto reset
22-85 Speed at
Design Point [RPM]
See Note 3 1,500 RPM 1,800 RPM
22-86 Speed at
Design Point [Hz] 50 Hz 60 Hz
24-04 Fire Mode
Max Reference 50 Hz 60 Hz
Table 5.1 International/North American
Default Parameter Settings
5.5 Parameter Menu Structure
Establishing the correct programming for applications
often requires setting functions in several related
parameters. These parameter settings provide the
adjustable frequency drive with system details it needs to
operate properly. System details may include such things
as input and output signal types, programming terminals,
minimum and maximum signal ranges, custom displays,
automatic restart, and other features.
•
See the LCP display to view detailed parameter
programming and setting options.
•
Press [Info] in any menu location to view
additional details for that function.
•
Press and hold [Main Menu] to enter a parameter
number for direct access to that parameter
•
Details for common application set-ups are
provided in
6 Application Examples
Programming
VLT
®
Automation Drive D-Frame
Instruction Manual
5-4 MG34U222 - VLT
®
is a registered Danfoss trademark
5 5