Danfoss VACON OPTE3, Руководство по установке

Страница: 52 / 64

Signal Connector pin Description
Shield connector 3 Shield connector
CAN HI 4 CAN bus HI
V+ 5 V+ (24 V), Communication power supply
6.3.2 The Jumpers in the OPTC7 Option Board
A
3
2
1
3
2
1
3
2
1
B C
e3
0b
i0
81
.1
0
A Cable shield is connected directly to PE (factory de-
fault setting).
B Cable shield is connected to PE through RC.
C Cable shield is connected to PE through RC.
Illustration 39: The Settings of the Jumper X1, Cable Shield Grounding, Positions A, B, and C.
6.4 The OPTC4 Option Board
6.4.1 The OPTC4 Option Board Layout
The OPTC4 option board is connected to fieldbus through a 3-pin pluggable bus connector. The communication with the control
board occurs through the standard VACON® interface board connector.
21
22
23
H3
H2
H1
X5
e3
0b
i0
92
.1
0
Illustration 40: The OPTC4 Option Board Layout
AN338644703080en-0002 / DPD02156 52 | Danfoss A/S © 2022.08
CAN Type and Other Fieldbus
Option Boards
VACON® RS485 and CAN Bus Option Boards
Installation Guide