manualshive.com logo in svg

Danfoss Vacon NXP Series, Руководство по эксплуатации, Страница: 23 / 174

Поделиться
Скачать
Danfoss Vacon NXP Series Скачать руководство пользователя страница 23

EMC class
in IEC/EN
61800-3 +
A1

VACON

®

equiva-
lent
EMC
class

Description

Available for

No EMC
emission
protection

N

The AC drives of this category do not give EMC emission protection. These drives are
installed in enclosures.

NOTICE

An external EMC filter is usually necessary to comply with the EMC emission
requirements.

NOTICE

RADIO INTERFERENCE

In a residential environment, this product can cause radio interference.

-

Take supplementary mitigation measures.

In IP00

3.8 Control Panel

3.8.1 Introduction to Control Panel

The control panel is the interface between the AC drive and the user. Use the control panel to control the speed of a motor and
monitor the status of the AC drive. Use it also to set the parameters of the AC drive.

The control panel can be removed from the AC drive. The control panel is isolated from the input line potential.

3.8.2 Keypad

The VACON

®

 keypad has 9 buttons with which you can control the AC drive (and motor), set parameters, and monitor values.

Product Overview

Operating guide | VACON® NXS/NXP Air-cooled

DPD00910G

 | 23

Danfoss A/S © 

2018.06

Содержание Vacon NXP Series















































































































































































Отзывы:

Нет отзывов