Danfoss VACON NX, Инструкция по применению

Страница: 195 / 360

•
•
•
•
•
•
•
•
•
10.79 (ID 321) AI1 Custom Setting Minimum
Location in the menu:
P2.2.5 (Local/Remote Control Application, Multi-Step Speed Control Application)
P2.2.17
(PID Control Application)
P2.2.2.4 (Multi-Purpose Control Application, Pump and Fan Control Application)
Use this parameter to adjust the minimum value of the analog input signal between -160%...160% freely.
10.80 (ID 322) AI1 Custom Setting Maximum
Location in the menu:
P2.2.6 (Local/Remote Control Application, Multi-Step Speed Control Application)
P2.2.18 (PID Control Application)
P2.2.2.5
(Multi-Purpose Control Application, Pump and Fan Control Application)
Use this parameter to adjust the maximum value of the analog input signal between -160%...160% freely.
Use the analog input signal, for example, as frequency reference, and set these 2 parameters between 40–80%. In these conditions,
the frequency reference changes between the
Minimum frequency reference ( ID 101 ) and the Maximum frequency reference ( ID 102 ),
and the analog input signal changes between 8–16 mA.
10.81 (ID 323) AI1 Signal Inversion
Location in the menu:
P2.2.7 (Local/Remote Control Application, Multi-Step Speed Control Application)
P2.2.19
(PID Control Application)
P2.2.2.6 (Pump and Fan Control Application)
Use this parameter to invert the analog input signal.
If this parameter = 0, no inversion of analog input signal takes place.
In Local/Remote Control Application, AI1 is place B frequency reference when parameter
ID 131 = 0 (default).
100% 0
ID304
ID303
ID321 ID322
ID320 = 0
AI1 = 0—100%
f
out
AI1
(term. 2)
ID320 = 1
AI1 = custom
e
3
0
b
h
0
3
6
.1
0
Illustration 43: AI1 No Signal Inversion
If this parameter = 1 inversion of analog input signal takes place.
Maximum AI1 signal = minimum frequency reference
Minimum AI1 signal = maximum frequency reference
AB296635287482en-000301 / DPD00903 | 195 Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide