background image

TP9000 Si

User Instructions

A. Setting the correct Time and Day

Fig. 1

B. Accepting the Factory Settings

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Before beginning programming, you should reset the unit.  Open the flap on the front 
of the clock.  Press the RESET

 

button using a non-metallic 

object (e.g. end of a bic biro 

pen top). 

 

(Fig 1)

The time and date are factory set and do not need to be set.

The TP9000 comes ready programmed with a set of Hot Water times and Central Heating 
times and temperatures to suit the average household. If you wish to alter these settings 
follow instructions below.

Your unit is set to operate in 7 day mode.

7 day

 – different settings for each day of the week

Please follow the instructions below:

C. Programming your central heating - 7 day mode

• 

A)Press the 

CH/HW

 button until the 

CH

 mode is selected

 (Fig 2a)

• 

B) Press 

PROG

 to show the 1st pre-set time and temperature (Event 1 Mon) 

(Fig 2b)

• 

C) Use 

+

 or 

 buttons to adjust the TIME (press and hold to change in 10 min 

increments). 

(Fig 3)

• 

D) Use 

Λ

 or 

V

 buttons to adjust the TEMPERATURE. 

(Fig 4)

• 

E) Press 

NEXT

 to move to next preset time & temp (Event 2) 

(Fig 5)

• 

F) Repeat steps c, d and e for programming Events 3, 4, 5 & 6.

• 

G) to select the next day, press DAY/HOL and repeat steps c, d, and e 

(Fig 6)

• 

H) repeat process as necessary to complete programming for all 7 days

To return to normal operating mode press and hold 

PROG

 until screen returns to the current

time. 

(Fig 7)

(a)

(b)

The TP9000 is a programmable room thermostat with combined hot water time 
control.

A programmer allows you to set On and Off time periods to suit the lifestyle of the 
occupier. 

A room thermostat works by sensing the air temperature, switching on the heating 
when the air temperature falls below the thermostat setting, and switching it off 
once this set temperature has been reached. A programmable room thermostat 
lets the occupier choose what times they want the heating to be on and what 
temperature it should reach while it is on.  It will allow you to select different 
temperatures in your home at different times of the day (and days of the week) to 
meet your particular needs.

The TP9000 controller is also unique in that it also controls the hot water timings in 
your home.

D. Programming your hot water - 7 day mode

• 

A)Press the CH/HW button until the HW mode is selected 

(Fig 8)

• 

B) Press PROG to show the 1st pre-set time (Event 1 Mon)

• 

C) Use + or – buttons to adjust the TIME (press and hold to change in 10 min 
increments). 

(Fig 9)

• 

D) Press NEXT to move to next preset time(Event 2) 

(Fig 10)

• 

E) Repeat steps c and d for programming Events 3, 4, 5 & 6.

• 

F) To select the next day, press DAY/HOL and repeat steps c, d, and e 

(Fig 11)

• 

G) Repeat process as necessary to complete programming for all 7 days

To return to normal operating mode press and hold 

PROG

 until screen returns to the current time. 

(Fig 12)

Отзывы: