© Danfoss | 2017.05
VI.HU.I3.02 | 1
NovoCon® S CO6, Energy, I/O
- High Accuracy Actuator
Operating Guide
❶
IP40
IP54
IP5
4
IP5
4
❷
❸
❹
❺
①
②
❻
Calibration:
Press button
①
until two
LED’s are turned on
DIP switch:
②
Manual override:
Adjust wheel
③
❼
NovoCon® analog cable
*VIHUI302*
③
②
①
Common ground shall be
used for all devices on the
same network.
Digital port
Port for CO6 actuator or Energy cable, I/O cable,
analog cable or voltage booster.
Digital port
Actuator NovoCon® ChangeOver
6
Flexible
NovoCon® Energy cable
- PT1000 surface sensors
NovoCon® Energy cable
- PT1000 immersed sensors
NovoCon® I/O cable
Red
Power 24V
Black GND
Grey
Analog input
Blue
Analog input ground
NovoCon® digital cable
Red Power
Black
Green
´+´ non-inverting signal wire
White/green ´−´ inverting signal wire
Common ground for power
and bus signal wire
Purple O-ring
Actuator NovoCon®
ChangeOver
6
Red
Power 24V
Black GND
White
CO6 Control signal
Grey
CO6 Feedback signal
Blue O-ring
Actuator NovoCon®
ChangeOver
6
Energy
Red
Power 24V
Black
Power ground. T1, T2 and V output signal ground.
Blue
V/mA input signal ground
Grey
V/mA input signal
White
V output signal
Yellow
T1 or resistance input
Orange T2 or resistance input