MPCAN input and output configuration
This receiver has four digital outputs or four digital inputs. The hardware is shared by these inputs and
outputs and they are chosen by EEPROM configuration.
Each input and output cannot be configured together at the same time.
The MPCAN includes a 7.5A internal fuse.
A1
A7
A8
A6
A5
IN1
IN2
IN3
IN4
Internal Vcc
MPCAN STOP category 3 PLe
Stop function is performed by two relays in series or parallel.
A10 and A9 pins should not be connected directly to GND.
Serie
ext
conne
external
connection
STOP
+IN
STOP
+OUT
A12 GND
A1 Vin
A10
A3
A9
A4
STOP2
CM
NO
STOP1
CM
NO
User Manual
MPCAN Receiver
Installation
10 |
©
Danfoss | March 2022
BC292573933619en-000201
